| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-35. BLOWER ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
42. Rear End
Install the ball bearings on the
Plate and
rotor and shafts in the rear end
Rotor
plate as follows:
Shaft Ball
Bearings
(1)
Reverse the position of the
blower housing on the two
wood blocks, end for end.
(2)
Lubricate the ball bearings
(97) with engine oil. Start
the bearing, numbered end up,
straight on one of the rotor
shafts (101 or 102).
(3)
Place installer J6270-7 on
top of the bearing and tap
the bearing straight on the
shaft and into the rear end
plate (88).
6-679
|
||
|
||
