Custom Search
TM 55-1905-221-14-4
6-36. TRANSMISSION OIL PUMP (Continued).
f. Remove the four screws (21 and
Screws (21) are
22) and lockwashers (23) securing
the oil pump cover (19) to the
inch and screws
oil pump body (24). Remove the
(22) are 3/8-16
cover and cover gasket (25) from
X 2-3/4 inch.
the pump body.
g. Remove the oil pump shaft snapring
(26) from the groove in the drive
(serrated) end of the oil pump
shaft (2).
h. Remove the oil pump shaft (2) and
inner rotor (1) as an assembly
from the oil pump body (24).
i. Slide the outer rotor (3) straight
out of the oil pump body.
j. Remove the oil pump inner rotor
(1) from the oil pump shaft (2)
as follows:
(1) Remove snapring (27) from the
non-splined end of the oil
pump shaft (2) next to the
inner rotor (1).


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business