Custom Search
TM 55-1905-221-14-4
6-36. TRANSMISSION OIL PUMP (Continued).
m. However, if both the oil seals
and bushings need replacing,
they may be removed as follows:
(1) Place the oil pump body on
the bed of an arbor press
with the rotor cavity end of
the pump body facing up.
(2) Place the bushing removing
end of tool J6904-1 inside
the oil pump body bushing
(5) and under the ram of
the press, as shown.
(3) Bring the ram of the press
down on the end of the
remover tool and press the
bushing (5) and oil seals
(35) out of the oil pump
body (24). Remove and
discard gasket (36).


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business