| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-36. TRANSMISSION OIL PUMP (Continued).
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
NOTE
When installing the rotor bushing in the oil pump body, refer to the above figure
for the proper location of the split in the bushing for "B" or "D" engine oil pumps.
(4) Place tool J3154-04 with
suitable plates on top of the
bushing (4) and under the ram
of the press as shown below.
(5) Bring the ram of the press
down on the tool and press
the bushing straight into the
body from flush to .010 inch
(0.025 cm) below the finished
face of the body.
6-721
|
||
|
||
