| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-36. TRANSMISSION OIL PUMP (Continued).
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
(5) Place the second gasket
(32) on the relief valve
cap (31). Then, install
the relief valve cap in
the relief valve bore in
the opposite side of the
pump body. Tighten both
caps securely.
m. Install the oil pump drive
shaft oil seals (35) in the
oil pump body (24) as follows:
(1) Place the oil pump assem-
bly on the bed of an
arbor press with the
serrated end of the oil
pump drive shaft facing
up.
(2) Place the oil seal gasket
(36) over the end of the
shaft and into the oil
seal bore in the body.
(3) Place an oil seal (35)
over the tapered end of
the oil seal protector
J6904-2 with the lip of
the oil seal facing
down.
NOTE
The lip of the inner oil seal faces the rotors when installed in the body.
(4) Apply a thin coat of
sealing compound to the
outside diameter of the
oil seal casing.
6-730
|
||
|
||
