| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-37. POWER TAKE-OFF ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
g. Lubricate the inside diameter of
the clutch release sleeve collar
(54) sparingly with an all purpose
grease such as Shell Alvania No. 2
or its equivalent. Note the match-
marks previously placed on the
collar, then place the two halves
of the collar over the shoulder on
the clutch release sleeve (21) and
secure in place with two bolts
(56) and nuts (55). Rotate the
collar on the sleeve to be sure it
rotates freely. If necessary,
loosen the retaining bolts, nuts,
and tap the edge of the collar
lightly with a plastic hammer to
free it up then retighten the nuts.
6-762
|
||
|
||
