Custom Search
TM 55-1905-221-14-4
6-37. POWER TAKE-OFF ASSEMBLY (Continued).
b. Push the power
take-off forward
and guide the
forward end of
the drive shaft
straight into the
clutch pilot
bearing (7), and
engage the teeth on
the outer diameter
of the clutch
facings (1) with
the teeth in the
inner diameter of
the driving
ring (5).
c. Guide the pilot on
the clutch housing
straight into the
front end adaptor
opening, then
install the clutch
housing to adaptor
using bolts (28),
(29). Tighten
bolts to 30-35
ft-lb (40.7-47.5
Nm) torque.
d. Remove chain hoist
and rope sling.
e. Install the clutch
control hand lever
(24) on the clutch
release shaft (40)
and secure it in
place with a bolt
(38) and lockwasher


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business