| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Cont)
NOTE
Do not remove engine support blocks.
b. Remove screws (20) and lock-
Screws are 1/2-
washers (21).
13 X 3-1/4 long.
c. Install two rope slings and a Support for re-
chain hoist.
verse gears and
adapter plate.
d. Start four bolts into tapped Bolts are
holes provided in the bolting
3/8-16.
flange at each side of reverse
gear housing.
e. Tighten bolts evenly and crowd
the reverse gear housing away
from the flywheel housings.
f. Pull the adapter plate (22) and
reverse gear housings (19)
assembled straight back until
the drive shafts clear the
flywheel housings (23).
g. Lift assembly away from the
engines and support on wood
blocks.
h. Remove gasket (24).
Discard.
6-840
|
||
|
||
