| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Cont)
v. Remove the special plug (55),
forward clutch dump valve
(56), and spring (57) from
the periphery of the flywheel.
w. Insert a small screw driver
beneath the forward clutch
piston inner seal ring (58)
in the flywheel and work the
seal ring out of its groove.
Then, remove the seal ring
and seal ring expander (59)
from the groove in the
flywheel.
x. Remove the outer seal ring Use method in
(60) and expander (61) from
step w, above.
the forward clutch piston
(5).
y. If the forward clutch piston
drive pins (62) in the inner
face of the flywheel are
damaged or worn excessively,
they should be removed as
outlined in steps z and aa
following.
6-861
|
||
|
||
