Custom Search
TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
p. Place the forward clutch
piston (5) on a bench with
the drive pin slots inside
of the piston facing up.
q. Place the outer seal ring
expander (61) in the seal
ring groove at the periphery
of the piston; then starting
at the approximate center of
the expander, feed the thick
lip of the seal ring (60)
into the groove next to the
expander with the narrow lip
of the seal ring facing the
side of the piston having the
drive pin slots.
r. Apply a light grade of engine
oil to the seal ring in the
forward clutch piston (5) and
in the flywheel (1).
s. With the flywheel resting on
the bench (ring gear side
down), place the piston (7)
into the flywheel with the
slots in the under side of
the piston in alignment with
the drive pins (62) in the


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business