| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
v. Support the reverse
clutch drive plate (11)
on an angle (rear face
of the plate facing up)
with the weight
of the plate resting on
the tools (T-head
bolts).
w. Apply a small amount of
cup grease on one end
of each reverse clutch
release spring (31).
Then, insert the
greased end of the
springs into the
sixteen holes in the
rear face of the drive
plate (11).
x. Place the reverse
clutch plate (10) and
ring gear (33) assembly
against the reverse
clutch drive plate (11)
with the ring gear
projecting through the
center of the drive
plate.
NOTE
Immerse the reverse clutch plate in a light grade of engine oil for approximately one-half hour
before assembling in the gear housing.
6-895
|
||
|
||
