| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
ak. Place the planetary gear
assembly (7) with sun
gear (8) over the end of
the drive shaft (6) (oil
collector ring side
facing the ring gear).
Align the splines in the
sun gear (8) with the
splines on the drive
shaft (6). Slide
the assembly straight
back on the drive shaft
(6) and through the ring
gear (9) until it
contacts the planetary
gear thrust washer
(28).
NOTE
When installing the planetary gear assembly (7), the reverse ring (9) must be raised up to permit
the planetary gears to mesh with the internal teeth of the ring gear.
al. Lubricate the second
reverse sun gear thrust
washer (27) with engine
oil. Then, place the
thrust washer over
the end of the drive
shaft (6) and over the
end of the planetary
gear assembly (7)
hub.
am. Install the planetary
gear retaining washer
(26) over the end of the
drive shaft (6) and
against the end of
the planetary hub.
6-901
|
||
|
||
