| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-42. VIBRATION DAMPER, CRANKCASE FRONT COVER AND CRANKSHAFT PULLEY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Cont)
CAUTION:
Pounding with a hammer, or prying with other tools must not be resorted to in removing the
viscous type damper from the crankshaft, since the outer shell may be dented and cause the
flywheel to turn at the same speed as the outer shell, thus rendering the damper ineffective! The
damper cannot be repaired.
b. Reinstall the pulley
crankshaft bolt (1) and
install puller as shown
below to loosen the
outer cone (7) wedged
between the crankshaft
and the damper hub (8).
After loosening the cone
it may be "fished" from
the inner diameter of
the damper hub with two
thin shank screw
drivers.
c. Slide the light vibra-
tion damper (9) and
heavy damper (10) with
damper hub (8) as
an assembly off the end
of the crankshaft by
hand.
6-948
|
||
|
||
