| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
d.
" efore Operation" checks are limited to those required for consecutive application by an assigned
B
operator/crew. The following instructions should be observed to obtain Increased inspections when the
LCM-8 is first assigned to an operator/crew or when operation is resumed after a period of nonuse.
Perform weekly as well as before operations PMCS as listed in table if:
a.
You are the assigned operator and have not operated the LCM-8 since the last weekly
inspection.
b.
You are operating the Item for the first time.
e.
The procedure column of your PMCS table tells you how to do the required checks and services.
Carefully follow these instructions If you do not have the tools, or if the procedure tells you to, have
organizational maintenance do the work
f.
If your equipment does not perform as required, refer to Chapter 3 under Troubleshooting for possible
problems Report any malfunctions or failures on DA Form 2404 or refer to DA PAM 738-750
g.
If your equipment requires removal in order to perform PMCS, refer to Chapter 3 under Maintenance
instructions or notify your supervisor
2-2 3 Equipment is not ready/available if: procedures.
This column tells you when and why your equipment cannot be used.
NOTE
The terms "ready/available" and "mission capable" refer to the same
status: Equipment is on hand and is able to perform its combat
missions (See DA PAM 738-750).
2-16
|
||
|
||
