Operator Preventive Maintenance Checks and Services (Continued)

Custom Search

Operator Preventive Maintenance Checks and Services (Continued)

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

Operator Preventive Maintenance Checks and Services (Continued)

TM 55-1905-22214'

Operator Preventive Maintenance Checks and Services - (Continued)

Equipment is Not

PROCEDURES

INTERVAL

Item To Be

ITEM

Ready/Available If:

Check for and have repaired

Inspected

NO.

or adjusted as necessary

LAZARETTE

Steering System

Inspect valves, pipe joints and

Class III leaks exist.

Valves, Piping,

hose assemblies for leaks and

Hoses and Fit-

other damage. Tighten joints

tings.

and replace valves and hose

assemblies as necessary (para.

4- 30)

Steering Cylin-

Inspect cylinders and

Class III leaks exist

ders

hydraulic connections for leaks

or damage Tighten and secure

hydraulic and mechanical con-

nections. Check both cylinders

for proper functioning

Steering System

Inspect counterbalance and

Counterbalance

connections for leaks Adjust

Valve

per para. 6-16.

Fuel Tank, Pip-

Inspect tanks valves, piping

Fuel tank contaminated with

ing, Valves,

joints and hose assemblies for

water.

Hoses and Fit-

leaks or damage Remove rust

tings

from tanks, then prime and

paint as necessary. Tighten

piping joints; replace valves

and hose assemblies as neces-

sary.

Ensure filler cap, sounding

tube cap, and vent cover are in

place and seal the fuel oil sys-

tem Check fuel tank for water

contamination, using water

indicator paste.

Sample fuel from each fuel

tank bottom drain valve

Change 6 2-25