| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
3-4 REPLACE NAVIGATION LIGHT BULB AND LENS HOUSING (Continued).
REMOVAL
1. REMOVE LENS HOUSING AND BULB
FROM MASTHEAD/PORT/STERN/STAR-
BOARD LIGHT
WARNING
De-energize all navigation lights at the control and
distribution panel in the pilothouse. Energized
circuits during replacement may result in injury or
damage to personnel and equipment.
a. Remove retainer (1) from lens
housing (2) Lens housing (2) will
remain attached to mounting bracket
(3)
NOTE
Do not remove lens housing unless replacement is necessary.
b. Remove bulb (5) from bulb holder
(6).
INSTALLATION
1. INSTALL LENS HOUSING AND BULB IN
MASTHEAD/PORT/STERN/STARBOAR
D LIGHT
a. Install new bulb (5) in bulb holder
(6).
b. Install retainer (I) and bulb holder
(6) to lens housing (2).
c. Install new lens housing (2) on
bracket (3).
d. Throw lever (4) on rear of lens
housing (2) In direction to tighten
the fixture.
3-21
|
||
|
||
