SERVICE SANITATION SYSTEM

Custom Search

INSPECT SANITATION SYSTEM (Continued).

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

REPLENISH DISINFECTION UNIT

TM 55-1905-222-14

3-7 SERVICE SANITATION SYSTEM.

INITIAL SETUP

Tools

Equipment Conditions

Tool Kit, Mechanic's, Rail

Reference

and Marine

Para. 3-6. Hatch covers removed

from receiving and treatment tanks,

Water Hose

filter cap and disinfection unit

cap removed.

Materials/Parts

Filter Element

P/N 31749

Gasket

P/N 31740

Sani-Start Activator

Disinfection Tablets

CLEAN RECEIVING AND TREATMENT

TANKS

a. Remove clogging material from the

interior of the receiving tank (1).

b. Install gasket (2) and hatch cover (3) on

receiving tank (1), and secure with

screws (4) and washers (5)

c. Attach a water hose to rinse fitting (6)

on hatch cover (3).

d. Open drain plug (7) and rinse the

receiving tank (1) thoroughly to remove

sludge.

e. Remove water hose from rinse fitting (6)

and install drain plug (7).

Clean exterior of receiving tank (1).

NOTE

Cleaning procedures for treatment tank are similar to the above.

3-29