INSTALL FILTER

Custom Search

SERVICE STEERING SYSTEM RESERVOIR, STRAINERS AND FILTERS.

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

SERVICE SEA WATER STRAINERS

TM 55-1905-222-14

3-11

SERVICE STEERING SYSTEM RESERVOIR, ST RAINERS AND FILTERS (Continued).

3. INSTALL FILTER

a. Fill filter (1) with clean hydraulic oil MIL-L-

17672 to displace air.

b. Install filter (1) onto the head casting (2).

4. CLEAN RESERVOIR AND STRAINERS

a. Clean tank inspection cover (5) with a

scraper.

b. Close drain valve (7), temporarily install

cover (5) and use flushing compound No

8509 (Spec AF-3595) to flush the tank (3)

c. Drain flushing compound, remove tank

inspection cover (5) and let dry for one

hour.

d. Clean suction strainers (9) with wire brush.

e. Clean the wire mesh screen on the

filler/breather-filter (8).

5. INSTALL STRAINERS, RESERVOIR

INSPECTION COVER AND FILLER/

BREATHER-FILTER.

a. Install cleaned strainers (9) or replacement

strainers in the tank (3).

b Install filler/breather-filter (8).

c Install gasket (6) if in good condition or

install a replacement gasket.

d. Install tank inspection cover (5) and secure

with capscrews (4).

e. Close drain valve (7) and fill steering

reservoir (3) with hydraulic oil MIL-L-

17672.

3-40