INSTALLATION - TM-55-1905-222-140231

Custom Search

REMOVAL

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

REPLACE MSD PUMP AND MOTOR ASSEMBLY

TM 55-1905-222-14

4-27

REPLACE FILTER, DISINFECTION UNIT AND RETENTION CANISTERS (Continued) .

REMOVAL

REMOVE RETENTION CANISTERS

a. Remove tubing assembly (16) from inlet port of

canisters (17).

b. Remove union (18) from overboard discharge

piping (19) and close nipple (20), remove close

nipple (20) from outlet port of canisters (17)

c. Remove four U-bolts (21) and their mounting nuts

(22) and lockwashers (23) from mounting base

(7), remove both canisters (17) and replace

INSTALLATION

INSTALL RETENTION CANISTERS

a. Install close nipple (20) in outlet port of

canisters (17).

b. Install canister (17) on mounting base (7) and

secure with U-bolts (21), lockwashers (23) and

nuts (22).

c. Install union (18) between close nipple (20)

and overboard discharge piping (19), tighten

connection to prevent leaks.

d. Install tubing assembly (16) In inlet port of

retention canisters (17)

4-56