REPLACE/REPAIR EXHAUST PIPING AND MUFFLER

Custom Search

REPLACE CHECK VALVE (STEERING SYSTEM)

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

REMOVAL

TM 55-1905-222-14

MAINTENANCE OF EXHAUST SYSTEM

4-34

REPLACE/REPAIR EXHAUST PIPING AND MUFFLER.

This task covers

a. Removal

c. Installation

b. Repair

INITIAL SETUP

Tools:

Equipment Conditions:

Tool Kit, Mechanic's, Rail

Reference

and Marine

Engines shut down

Exhaust system cool

Machine, Welding

Materials/Parts:

General Safety Instructions:

Gasket (MIL-G-14243 Class 1)

Prior to removing exhaust system, ensure

the manifold and piping are cool If

this is not possible, ensure personnel wear

gloves when handling hot engine pieces

References:

Thermo-Insulation Requirements

(MIL-STD-769G)

REMOVAL

CAUTION

Ensure personnel wear gloves when handling hot engine pieces. Handling hot engine

pieces with bare hands or skin may result in severe burns.

REMOVE EXHAUST PIPING AND MUFFLER

a. Remove thermal covering from muffler and

exhaust piping.

b. Remove screws (1), flat washers (2),

lockwashers (3) and nuts (4) from flexible

connection (5) Remove and discard gasket (6).

4-68