| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
REPAIR
REPAIR EXHAUST PIPING MUFFLER
NOTE
Welding must be done by a qualified welder only.
a. Inspect muffler, hard piping and
flanges for cracks.
b. Weld cracks and re-fabricate piping
between flanges as necessary.
c. Grind all welds smooth.
INSTALLATION
INSTALL EXHAUST PIPING AND MUFFLER
NOTE
Replace all gaskets removed during removal procedures.
a. Align mounting holes in gasket (47), expansion
joint connector (46) and plate (48). Tighten with
screws (44) and lockwashers (45).
b. Install gasket (43) and elbow (37). Tighten with
screws (39), flat washers (40), lockwashers
(41) and nuts (42).
4-70
|
||
|
||
