| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
5-16
REPLACE RAMP HOIST HYDRAULIC PUMP (Continued).
INSTALLATION
INSTALL RAMP HOIST HYDRAULIC PUMP.
a.
Position pump
(1) in place on mounting
bracket (6).
b.
Install coupling (4).
c.
Secure pump (1) with bolts (5).
CAUTION
Do not force the pump into place. Use of force, or tightening the
bolts when the mounting flange is not against the flywheel housing,
will force the drive arm against the pump body and result in damage
to the pump when the engine is started.
d.
Apply sealant sparingly to all MALE PIPE THREADS only and work it into the threads.
CAUTION
Do not apply sealant to the last thread (that nearest the open end),
or the female fittings, as it may wash into the system.
e.
Remove caps from lines, and connect the hydraulic lines (2 and 3) to the pump (1).
5-39
|
||
|
||
