DISASSEMBLY - TM-55-1905-222-140303

Custom Search

REPAIR RAMP WINCH HYDRAULIC MOTOR

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

DISASSEMBLY-cont.

TM 55-1905-222-14

5-23

REPAIR RAMP WINCH HYDRAULIC MOTOR (Continued).

DISASSEMBLY

DISASSEMBLE MOTOR.

Remove capscrew (1) and the five capscrews

(2) from the port end cover (3).

Remove the two pipe plugs (4).

Lift off the port end cover (3), Items 18

through 28 will be removed with the port end

cover (3). For disassembly of these parts see

steps i thru r.

Remove motor shaft (5) from shaft end covers

(6).

The large gear (7) and key (8) will be

removed with the motor shaft (5).

Press the large gear (7) off the motor shaft

(5) and remove key (8). Note which end of the

gear was next to the port end cover (3) for

reassembly the same way.

5-55