| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
5-46
REPLACE FILTERS (STARTING SYSTEM).
This task covers.
a. Removal
c. Cleaning
e. Installation
b. Disassembly
d. Assembly
INITIAL SETUP
Tools:
Equipment Conditions:
Tool Kit, Mechanic's, Rail
Engine shut down
and Marine
Materials/Parts:
General Safety Instructions:
Cleaning Solvent
Relieve pressure in the starting system
Item 17, Appendix E
before removing filters
Filter Element
P/N FE 200575
'O' Ring
P/N GA 100201
Hydraulic Fluid
Item 12, Appendix E
REMOVAL
REMOVE IN-LINE FILTER
a. Remove U-bolt (1) and nut (2) securing filter
housing (3).
b. Disconnect hose assembly (4) from inlet side of
filter housing (3).
c. Unscrew filter assembly from the reducing hex
nipple (5) connecting the filter assembly and the
control valve.
d. Remove male connector (6) from the inlet port
of the filter assembly.
5-118
|
||
|
||
