| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
6-5 REPAIR ALTERNATOR (Continued).
7
REMOVE SLIP RING
NOTE
Do not remove slip ring assembly unless rings are damaged/ worn or rear
bearing is to be replaced.
a
Unsolder the two rotor leads from
the slip ring terminals Carefully
unwind the leads.
b
Remove the hex lead capscrew (23)
and lockwasher (24) from the end of
the shaft
c
Thread a 1/4 in x 28 x 2 1/2 in
capscrew into the slip ring hub,
using an alien tool; when this screw
bottoms, the slip ring assembly (25)
will separate from the shaft.
Remove slip ring terminal insulators.
8
REMOVE REAR BEARING RETAINER
AND REAR BEARING
a
Remove rear bearing retainer (26)
with pliers
b
Dress rotor leads away from bearing
puller contact area. Carefully
remove rear bearing (27).
9
REMOVE RFI CAPACITOR
a
Remove locknuts (28) , lockwashers
(29), and flat washer (30) from the
three AC terminals studs, remove
the RFI capacitor (31) from the rear
housing (6).
6-9
|
||
|
||
