| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
6-5 REPAIR ALTERNATOR (Continued).
CLEANING
CLEAN ALTERNATOR COMPONENTS.
a
Wipe front bearing seals with a
clean lint-free cloth to remove
foreign material and old grease
CAUTION
Do not use compressed air on rotor or stator windings. Undetectable flaws
may be created, making the assembly less than acceptable.
b
Wipe off stator and rotor with a
clean lint-free cloth
c
Clean front housing, rear housing,
fan, and pulley with a clean lint-
free cloth
WARNING
Dry cleaning solvent, P-D-680, used to clean parts, is potentially dangerous
to personnel and property. Avoid repeated or prolonged skin contact. Do not
use near open flame or excessive heat. Flash point of solvent is 100-
138F (38 59C).
-
d. Clean ball bearings, retainers and
washers in solvent P-D-680 and
allow to air dry
e
Clean brush contacting surfaces of
slip rings with fine crocus cloth to
remove minor roughness. Replace
slip ring assembly If necessary.
6-11
|
||
|
||
