ASSEMBLY - TM-55-1905-222-140408

Custom Search

CLEANING

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

ASSEMBLY-cont.

TM 55-1905-222-14

6-7

REPAIR RAMP HOIST CONTROL VALVE (Continued).

Remove score marks or burrs from sealing

surfaces of bodies or sections, with extra fine

emery cloth. Replace any section or body if

warped.

Replace other damaged or defective parts as

required.

ASSEMBLY

1. ASSEMBLE CONTROL VALVE LEVER

a. Insert watertight connector (43) into place.

b. Install sealing ring (42) and locknut (41) onto

connector.

c. Insert lever bar (40) thru watertight connector.

d. Insert ramp lever (47) into lever bar (40), and

install clevis pin (39), washer (33), and cotter

pin (38).

e. Install clevis pin (46), washer (45), and cotter

pin (44).

Insert valve handle bar (35) into lever bar

(40) and secure with clevis pin (34), washer

(33), and cotter pin (32).

g. Install shear detent pin (36) and chain (37), if

removed.

ASSEMBLE RAMP HOIST CONTROL VALVE

NOTE

Coat all parts with clean hydraulic oil to facilitate reassembly and provide Initial lubrication.

Petroleum Jelly can be used to hold packings in place on the assembly.

6-28