CLEANING - TM-55-1905-222-140450

Custom Search

REPAIR STEERING CYLINDERS

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

INSPECTION

TM 55-1905-222-14

6-13

REPAIR STEERING CYLINDERS (Continued).

Remove bearing cartridge (10), rod wiper (11),

and rod bearing (12). Discard rod wiper.

Remove rod packing retaining ring (13)

and

packing (14). Discard packing.

Remove cartridge ring (15) and preformed

packing (16) from head end cover (17). Discard

packing.

Remove piston retaining lockscrew (18), piston

(19),

piston

ring packings (20), and

preformed packing (21). Discard packings.

Unscrew tie rods (22) from end cap cover (7).

Remove 'O' ring retainer (23) and packing (24)

from end cap cover (7). Discard packing.

CLEANING

CLEAN ALL PARTS

WARNING

Dry cleaning solvent, P-D-680, used to clean parts, is potentially dangerous to

personnel and property. Avoid repeated or prolonged skin contact. Do not

use near open flame or excessive heat.

Flash point of solvent is 100 -

138F (38 59C).

Clean all metal parts using cleaning

solvent, Fed. Spec. P-D-680, and dry

thoroughly.

6-70