| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
6-15
REPAIR FLOW DIVIDER (Continued).
h.
Remove pipe plug (17) from bottom of housing (4).
CLEANING
CLEAN ALL PARTS
WARNING
Dry cleaning solvent, P-D-680, used to clean parts, is potentially dangerous to
personnel and property. Avoid repeated or prolonged skin contact. Do not use
near open flame or excessive heat. Flash point of solvent is 100 - 138F
(38- 59C).
Clean metal parts in cleaning
solvent, Fed Spec. P-D-680, and
dry thoroughly.
INSPECTION
INSPECT FLOW DIVIDER.
a.
Inspect springs for distortion or loss of tension.
b.
Inspect threaded parts for thread damage.
c.
Inspect spool for burrs, scoring or plugged ports.
d.
Inspect shims for wear.
e.
Inspect ball for burrs or flat spots.
f.
Inspect guides for burrs or wear.
g.
Inspect housing for cracks.
h.
Replace all packings.
i.
Replace defective springs.
j.
Replace damaged threaded parts.
6-81
|
||
|
||
