| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
6-19 REPAIR STARTING MOTOR (Continued)
CLEANING
CLEAN ALL PARTS
WARNING
Dry cleaning solvent, P-D-680, used to clean part, is potentially
dangerous to personnel and property. Avoid repeated or prolonged
skin contact. Do not use near open flame or excessive heat. Flash
point of solvent is 100138 (38 59 ).
-
F
-
C
Clean metal parts in P-D-680,
and dry thoroughly.
INSPECTION
INSPECT STARTING MOTOR
a. Visually check pinion gear
housing (3) for cracks or
other
damage. Examine
bearing (30) for damage or
wear Replace if necessary.
b. Examine drive assembly pinion
gear (5) to be sure that the
teeth are not worn excessively
or chipped from interference
with ring gear. Check to Insure
that the compressing spring is
not damaged or broken.
c. The port plate face, where
cylinder rides, must be smooth
and free of scoring
Also
check the bearing (29).
6-104
|
||
|
||
