| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
6-22
REPLACE PROPELLER AND PROPELLER SHAFT (Continued).
d. Install washer (24), slotted heavy hex nut
(23) and cotter pin (22).
e. Match shaft coupling (20) and transmission
output flange and prepare for bolting
together.
f.
Place a straight edge across edges of
flanges at top and side to check parallel
alignment of coupling edges.
g. Place a 0 002-inch feeler gauge between
flanges of coupling and slide feeler gauge
completely around coupling.
h. Rotate transmission flange coupling 90,
180 and 270 degrees while moving feeler
gauge around the flange in each
successive position. If the alignment is
correct, the feeler gauge will fit snugly,
with some tension all around flange
coupling.
i.
Bolt transmission output flange and shaft
coupling (20) together with eight bolts (18)
and nuts (19).
2. INSTALL PACKING AND SECURE
STUFFING BOX AND HOSE ASSEMBLY.
a. Install new packing in stuffing box (12).
b. Install packing brace (11) and secure to
stuffing box (12) and mounting plate using
four bolts (14) and nuts (15). Adjust
stuffing box (12) as required (para. 3-18).
c. Slide up flexible hose (17) against stuffing
box (12) and secure with hose clamps (16).
6-119
|
||
|
||
