INSTALLATION - TM-55-1905-222-140519

Custom Search

TESTING

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

INSPECT AND REPLACE ANODES.

TM 55-1905-222-14

6-26

INSPECT, SERVICE, TEST, REPLACE AND REPAIR KEEL COOLER (Continued).

INSTALLATION

1. INSTALL KEEL COOLER.

NOTE

Two (2) personnel are required to lift cooler into recess of hull for mounting.

a. Place neoprene gaskets (15) and flat

washers (14) over pipes (16 and 17).

b. Place cooler (13) into recess of hull for

mounting.

c. Place neoprene gaskets (11) and flat

washers (10) onto over mounting studs

(12).

d. Install nuts (9) to torque nuts to 7-9 ft lb.

(9.5-122 Nm).

e. Place neoprene gaskets (8) and copper

washers (7) onto pipes (16 and 17).

Install nuts (6). Torque nuts to 7-9 ft lb.

(95-122 Nm).

2. INSTALL KEEL COOLER PIPING.

a. If removed, install pipe hanger (3), and

pipe (4).

Place hose clamps (1) over hose (2).

Place hose (2) over ends of piping (6 and

5).

d. Slide hose clamps (1) into position and

tighten securely.

e. Repeat steps to install other cooler.

6-139