| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
Table 2-1. Description of Operator's Controls and Indicators - CONT
Key
Control or Indicator
Function
Stern Anchor and Winch Controls (FIGURE 2-48)
1
START
Pushbutton starts stern anchor winch hydraulic
pump motor (green).
2
MOTOR RUNNING
Indicates hydraulic pump motor is operating
(green).
3
HEATER ON
Not used.
4
HOT OIL
Indicates hydraulic oil temperature is above
normal (red).
5
BUZZER RESET
Resets alarm signal.
6
LOW OIL
Indicates hydraulic oil level is low and should
be replenished (red).
7
DIRTY ELEMENT
Indicates hydraulic oil filter element should
be cleaned or replaced (red).
8
HAUL OUT
PAY OUT
Moving switch to HAUL BACK position rotates
main spool counterclockwise and hauls in anchor.
Moving switch to PAY OUT position rotates main
spool clockwise and pays out anchor.
9
STOP
Pushbutton stops stern anchor winch hydraulic
pump motor (red)
10
Level Wind Carriage
Level winds wire rope onto main spool.
11
Main Spool
Stores stern anchor wire rope.
12
Brake Handwheel
Engages mechanical brakes on stern anchor winch
drum.
13
Hydraulic Failsafe
Locks brakes stopping main spool rotation when
Brake
hydraulic pressure is lost.
14
Hydraulic Motor
Controls speed of stern anchor winch.
Assy Flow
(Speed Control Valve)
2-129
|
||
|
||
