| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
Table 2-2. Operator/Crew Preventive Maintenance Checks and Service - CONT
B - Before
D - During
A - After
W - Weekly
M - Monthly
INTERVAL
PROCEDURES
EQUIPMENT IS
ITEM
ITEM TO BE
CHECK FOR AND HAVE REPAIRED
NOT READY/
NO
B
DA W M
INSPECTED
OR ADJUST AS NECESSARY
AVAILABLE IF:
97
Ship's Service
Diesel Generator
(STBD) -
continued
Engine
Inspect engine, generator, fuel
Accessories and
injection pumps and cooling
Connections
pumps for loose or damaged
connections or mountings.
Water Pump Belt
Visually inspect the engine,.
Look for glazed, loose, frayed,
cracked or misaligned belt,
refer defects to unit
maintenance.
Hoses
CAUTION
Do not bend or deform the hoses
during inspection. This can
cause the hoses to crack.
a.
Visually inspect all hoses
for cracks or cuts and check
for any signs of bulging or
collapsing.
b.
Check for loose fittings and
Class III
clamps, and signs of leak-
leaks.
age. Tighten or replace as
necessary.
c.
For replacement, refer to
unit maintenance.
Oil Level
NOTE
Allow time for the oil to
settle in the pan after engine
shutdown.
Check the engine oil level.
The oil level should be at, or
near, the "H" (high) mark on
the dipstick. Add oil as
necessary. Refer to LO 55-
1905-223-12 for oil
specifications.
2-265
|
||
|
||
