Table 2-2. Operator/Crew Preventive Maintenance Checks and Service - CONT

Custom Search

Table 2-2. Operator/Crew Preventive Maintenance Checks and Service - CONT

TM-55-1905-223-10 Landing Craft Utility (LCU 200 Class) NSN 1905-01-154-1191 Manual

Table 2-2. Operator/Crew Preventive Maintenance Checks and Service - CONT

TM 55-1905-223-10

Table 2-2. Operator/Crew Preventive Maintenance Checks and Service - CONT

B - Before

D - During

A - After

W - Weekly

M - Monthly

INTERVAL

PROCEDURES

EQUIPMENT IS

ITEM

ITEM TO BE

CHECK FOR AND HAVE REPAIRED

NOT READY/

DA W M

INSPECTED

OR ADJUST AS NECESSARY

AVAILABLE IF:

101

Main Propulsion

Engine (STBD) -

continued

Start Control

Start engine and note action of

starter mechanism, particularly

whether mechanism has adequate

cranking speed and whether it

engages and disengages without

unusual noise when the control

is operated. Set throttle so

that the engine will run at

normal warmup speed until pre-

scribed operating temperature

is reached. If the oil pres-

sure gauges do not indicate the

proper pressure as specified

within 30 seconds, stop the

engine.

102

Propeller and

Check for unusual vibrations.

Shaft is

Propeller Shaft

misaligned or

(STBD)

bent, propeller

blades are bent

or damaged or

cutlass bearing

is excessively

worn.

103

Marine

Sanitation

Device

Macerator

Check for audible or visual

malfunctions.

Discharge Pump

Check for audible or visual

malfunctions.

Flow Pump

Check for audible or visual

malfunctions.

2-272