| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
NOTE
When each tank is filled, open next tank valve before closing tank valve of tank
that is being filled.
(b) F-3S tank, open FO-8, SUPPLY TO TK F-3S (57).
(c) F-4P tank, open FO-5, SUPPLY TO TK F-4P (59).
(d) F-4S tank, open FO-9, SUPPLY TO TK F-4S (61).
(e) F-7P tank, open FO-12, SUPPLY TO TK F-7P (55).
(f)
F-7S tank, open FO-13, SUPPLY TO TK F-7S (63).
(g) Turn on tank level indicators, (FIGURE 2-168) by setting POWER switch (1) to ON position.
(6)
When tank has been selected and the proper alignment made, direct the fuel oil supplier to start
pumping the fuel oil.
WARNING
During fueling operation, close coordination is required between crew and fuel oil
supplier to prevent spills or overfilling tanks.
NO SMOKING is allowed during fueling operation.
(7)
As each tank is filled, close supply valve to that tank.
(8)
When all fuel oil has been taken aboard, close FO-1, FUEL OIL FILL/DISCH (45, FIGURE 2-167) for
port side or FO-2, FUEL OIL FILL/DISCH (46) for starboard side depending on side fuel was taken on.
(9)
Close FO-3, ISLN-FILL/DISCH STATIONS (1) and FO-4, SUPPLY TO FO SUPPLY MANF (2).
(10)
Disconnect fueling hose from overboard discharge/fill connection.
b.
Transfer fuel oil between fuel oil tanks.
(1) To transfer fuel oil using NO 1 XFR PUMP, open FO-52, SUCT-NO. 1 XFR PUMP (5, FIGURE 2-
167).
(2) Open FO-53, DISCH-NO. 1 XFR PUMP (4).
(3) Open FO-4, SUPPLY TO FO SUPPLY MANF (2).
(4) Open FO-54, DIST PUMP DISCH PRESS GAGE (6).
(5) Open FO-49, PUMP SUCT PRESS GAGE (8).
2-478
|
||
|
||
