| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
WARNING
Before operating stern anchor winch, ensure personnel and foreign objects are
clear of wire rope drum, wire rope, and related components. Moving winch, wire
rope and gypsies can cause serious injury or death.
Keep all personnel clear of winch and wire rope while in operation.
Keep all personnel clear of moving and rotating parts of winch.
Do not attempt to perform any maintenance or repairs while winch is running
Do not operate this winch with guards removed.
Do not operate hydraulic motor with brake engaged.
NOTE
On first wrap down (fast) speed is 35 FPM (feet per minute) and up (slow) speed is
17 FPM.
b. Lowering Anchor by Paying Out Wire Rope.
(1) On Stern Anchor Winch (FIGURE 2-184) engage CLUTCH LEVER (4).
NOTE
If clutch does not engage, jog drive gently by turning HAUL BACK-PAY OUT
switch to haul back, and then quickly release it. This allows clutch to engage,
taking strain off anchor hold back wire rope.
(2) Lock CLUTCH LEVER (4).
(3) Disconnect ANCHOR HOLDBACK turnbuckle (1, FIGURE 2-185) from anchor.
(4) Disengage dog lever as follows:
(a) Slowly turn BRAKE HANDWHEEL (2, FIGURE 2-184) counterclockwise to release brake.
(b) Slowly turn HAUL BACK-PAY OUT switch (3, FIGURE 2-183) to HAUL BACK position until dog lug
is free from MAIN SPOOL (1, FIGURE 2-184).
(c) Push DOG LEVER (3), aft until dog is away from MAIN SPOOL (1).
(5) On Stern Control Box (FIGURE 2-183), turn HAUL BACK-PAY OUT switch (3) clockwise to PAY
OUT position to pay out anchor wire rope to the desired length. Release HAUL BACK-PAY OUT
switch (3).
2-514
|
||
|
||
