| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
NOTE
It may be necessary for the tow to adjust the length of its anchor chain to achieve
the desired catenary.
(12) Veer the tow hawsers (4) until the tow is astern the desired distance and the proper catenary
is achieved. Tow hawsers must be adjusted until there is sufficient catenary in the tow line to
prevent parting the towing gear.
(13) Secure the tow hawsers by figure eighting on the bitts (6).
NOTE
Chafing gear may be made from canvas, split hose, or other such material.
Chafing gear must extend at least twelve inches on each side of the point of contact to allow
for stretch for the tow hawser.
(14) Apply chafing gear to each tow hawser at each point it makes contact.
b. Towing in protected water. The method used to tow in protected waters will use the same rigging as
described in a. above. Adjust length of tow hausers based upon the situation (e.g., weather
conditions, type of vessel to be towed, reason vessel required tow, and equipment on hand).
2-640
|
||
|
||
