| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
(5) Detach metallic hose assembly (18) from cylinder block. Remove and discard
preformed packing (22).
(6) Remove two hexagon head capscrews (23) and lockwashers (24) attaching mtallic hose
e
assembly (18) to turbocharger (16).
(7) Remove metallic hose assembly (18) and gasket (17). Discard gasket (17).
(8) Disconnect nonmetallic (oil inlet) hose assembly (37) and straight adapter (36) from
turbocharger (16).
(9) Remove hexagon head capscrew (35), lockwasher (34) and flat washer (32) securing
nonmetallic hose loop clamp (33). Remove loop clamp.
(10) Disconnect pipe-to-tube adapter (31) from pipe bushing (30). Remove pipe-to-tube
adapter (31), pipe bushing (30) and nonmetallic hose (37).
(11) Loosen hose-clamp (14) to after cooler air hose (15). Disconnect hose (15) from
turbocharger (16).
(12) Remove four hexagon head capscrews (29) securing turbocharger (16) to manifold.
WARNING
The turbocharger weighs 50 lb (23 kg) or more. To avoid personnel injury, two
soldiers are required to lift the turbocharger.
(13) Remove turbocharger (16) and turbocharger gasket (28). Discard gasket.
b.
To remove exhaust connections perform the following steps.
(1) Remove exhaust connection blanket (1).
(2) Remove thermocoupler (6) in accordance with TM 55-1905-223-24-18.
(3) Loosen loop clamp (13) on exhaust connection (12). Disconnect exhaust connection
(12) from turbocharger (16).
(4) Remove 16 hexagon head capscrews (2), lockwashers (3) and plain hexagon nuts (8).
(5) Remove exhaust connection (4) and gasket (5). Discard gasket.
(6) Remove pipe plug (7) from exhaust connection (12).
(7) Remove four machine screws (9) securing exhaust connection (12) to exhaust connection
bracket (10). Remove exhaust connection (12) and loop clamp (13).
(8) Remove four machine screws (11) from exhaust connection bracket (10). Remove
exhaust connection bracket.
2-66
|
||
|
||
