| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
(2) Remove two reducing pipe elbows (4) from fluid filter body (18).
(3) Remove fluid filter body (18) from two reducing pipe nipples (17).
REPAIR
Repair consists of replacement of defective parts.
ASSEMBLY
a.
To replace fluid filter body (18) perform the following steps.
(1) Connect two reducing pipe nipples (17) to fluid filter body (18).
(2) Connect two reducing pipe elbows (4) to fluid filter body (18).
(3) Insert new fluid filter element (3).
(4) Install gasket (2).
(5) Install fluid filter body top (1). Hand tighten holddown bolt (19).
b.
To replace components of top section of fluid filter assembly, perform the following steps.
(1) Connect two reducing pipe elbows (4) and two shutoff valves (5).
(2) Connect two pipe elbows (6).
(3) Connect pipe nipple (10).
(4) Connect pipe tee (9).
(5) Connect pipe adapter (8) and pipe nipple (7) to pipe tee (9) and pipe elbow (6).
c.
To replace components of bottom section of fluid filter assembly, perform the followingsteps.
(1) Connect two reducing pipe nipples (17) to two shutoff valves (16).
(2) Connect two pipe elbows (15).
(3) Connect pipe nipple (14) to pipe elbow (15) and pipe tee (13).
(4) Connect pipe adapter (11) to pipe elbow (15) and pipe nipple (12).
(5) Connect pipe nipple (12) to pipe tee (13).
d.
Replace fuel filter assembly, paragraph 2-20.
e.
Start engine (TM 55-1905-223-10), check for leaks, correct as required.
2-74
|
||
|
||
