| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
2-24. Replace Lube Oil Filter Assembly. (FIG. 2-21)
This task covers:
a. Inspection and Servicing
b.
Removal
c. Repair
d.
Replacement
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's rail
Engine Shutdown. TM 55-1905-223-10.
and marine diesel engine
Torque wrench kit P/N 3377216
Filter cutter P/N 3376579
Oil filter wrench P/N 3375049
Materials/Parts
Fluid filter elements P/N 3313282
Engine lube oil, Item 2, Appendix C
Filter head gasket P/N 3177108
Lube oil filter head gasket P/N 3011650
INSPECTION AND SERVICING
Inspection and servicing of lube oil filter assembly is covered in Table 2-1.
REMOVAL
CAUTION
Upon removal and replacement of this unit, cover, blank, or
otherwise protect all openings to prevent foreign matter from
entering and damaging the system.
a. Remove lube oil filter assembly.
(1) Disconnect and remove pre-lube oil line (4).
(2) Remove five fluid filter elements (6) by unscrewing with filter wrench.
(3) Use filter cutter to cut open the fluid filter elements. Check inside fluid filter elements for metal
particles. Determine cause of problem if metal particles are found. Disca d fluid filter elements.
r
(4) Turn adaptor counterclockwise to disconnect the instrument panel oil line from its port (2), located
near the rear of the lube oil filter assembly (5).
2-82
|
||
|
||
