| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
a. Lubricate preformed packings (8) with clean engine lube oil.
b. Install preformed packings (8) in grooves of element pipes.
c. Reach in through cooler access hole in engine block and lubricate seals and bore with clean engine lube
oil.
d. Push lube oil cooler element (9) into engine block bore until all preformed packings (8) are in bore
completely.
e. Position preformed packings (10) on each threaded pipe of element (9).
f. Position water header cover gaskets (7 and 11) on engine block with bolt holes aligned.
g. Position access cover (6) on gasket (7) with bolt holes aligned and threaded pipes of element (9)
protruding through openings in cover (6).
h. Install self-locking nuts (5), capscrews (4) and lockwashers (3). Tighten capscrews (4) to 30 ft-lb (40 N
m). Tighten self-locking nuts (5) to 45 ft-lb (60 N my.
i. Position access cover (2) on gasket (11) with bolt holes aligned.
j. Install hexagon head capscrews (1) and lockwashers (12). Tighten capscrews to 30 ft-lb (40 Nm).
3-38
|
||
|
||
