| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
b. Disassemble oil pan adapter (1).
(1) Remove machine bolts (14) and lockwashers (13) retaining the liquid level float switch (12) to
the switch bracket (9). Remove the switch (12).
(2) Remove two hexagon head capscrews (11) and lockwashers (10) retaining bracket (9). Remove
bracket.
(3) Remove pipe plugs (2 and 30) and oil drain plug (21), insert (20), andgasket (22).
(4) Remove machine bolts (23), lockwashers (24), and flat washers (25) retaining the cover (26).
Remove the cover (26), and gasket (27), from the oil pan adapter (1).
REPAIR
a. Using a scraper, remove all gasket material on the gasket surfaces of the covers (4 and 26), oil pan
(19), and adapter (1).
b. Steam clean the oil pan (19) and adapter (1). Clean up other components thoroughly.
WARNING
High pressure compressed air tanks, piping systems, and air
operated devices possess potential for serious injury to
eyes and exposed areas of skin due to escaping air pressure.
c. Use compressed air to completely remove all water, and solvent if used.
d. Inspect the cover (4 and 26), oil pan (19), and adapter (1) for cracks or warping. Replace as required.
e. Inspect all threaded components for thread wear or damage, or rounded heads. Replace as required.
f. Inspect all gaskets for tears, warping, or other physical damage. Replace as required.
g. Check the magnets on the drain plugs and make sure they are thoroughly clean. Replace if magnetic
force appears weak.
ASSEMBLY
a. Assemble oil pan adapter (1).'
3-60
|
||
|
||
