| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-10
b. If bow ramp is raised, ensure that both locking assemb lies (2) are locked.
c. Relieve tension on wire rope and stud chain by loosening plate stopper ring (3) and adjusting turnbuckle outward
extension (6).
WARNING
Keep personnel away from areas around or under wire ropes and stud chains. A
falling wire rope or stud chain can cause serious injury or death.
d. Secure the turnbuckle ends of the wire rope and stud chain with suitable devices to prevent them from falling.
e. Remove pin (5) connecting end of stud chain (4) to turnbuckle.
f.
Remove pin (5) connecting end of wire rope (8) to turnbuckle.
g. Remove the turnbuckle (7).
REPAIR
Repair of turnbuckle assembly consists of replacing any component found to be unserviceable.
REPLACEMENT (FIGURE 2-10).
a. Install pin (5) connecting end of wire rope (8) to turnbuckle (7).
b. Install pin (5) connecting end of stud chain (3) to turnbuckle (7).
c. Remove devices that prevented the wire rope and stud chain from falling.
d. Apply tension to wire rope and stud chain by adjusting turnbuckle inward.
2-70
|
||
|
||
