Section III. INTERMEDIATE GENERAL SUPPORT PREVENTATIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

Custom Search

Chapter 4. INTERMEDIATE GENERAL SUPPORT MAINTENANCE INSTRUCTIONS

TM-55-1905-223-24-10 Bow Ramp Assembly for Landing Craft Utility (LCU) NSN 1905-01-154- 1191 Manual

Table 4-1. Troubleshooting

TM 55-1905-223-24-10

d. Remove and replace protective caps, plugs, inserts, wrappings, and tape when inspection/inventory is completed.

Inspect piping openings for damage. Wipe off dirt, grease, or protective films at time of installation.

e. Remove chocks from resilient mounted components.

Section III. INTERMEDIATE GENERAL SUPPORT PREVENTATIVE

MAINTENANCE CHECKS AND SERVICES (PMCS)

4-5. PMCS. Intermediate general support preventive maintenance checks and services are a function of unit

Section IV. INTERMEDIATE GENERAL SUPPORT TROUBLESHOOTING

4-6. Troubleshooting. Both a symptom index and a troubleshooting table are provided. The symptom index will help

you locate the information you need for troubleshooting.

SYMPTOM INDEX

Troubleshooting

Procedure

BOW RAMP WINCH

Will not rotate

Item 1

Rotates slowly

Item 1

EMERGENCY HANDCRANK

Will not rotate clockwise

Item 2

HYDRAULIC SYSTEM

Excessive temperature

Item 3

Table 4-1 lists the common fault conditions that may be found during operation or maintenance of the-equipment. Look

for causes and do corrective actions in the order listed. This manual cannot list every symptom that may show up, and it

cannot list all the possible causes and corrective actions. If a symptom is not listed, or if it keeps up after you have

performed the corrective actions, notify your supervisor.

4-2