| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-10
ASSEMBLY
NOTE
When installing preformed packing, back-up washers and spool
piece coat with clean system oil prior to assembly.
a. Install into valve body (12), spool piece (26), flat washers (9), springs (8), preformed packing (7) into covers (6)
and install covers using hex head capscrews (5).
b. Install into valve assembly (12), side parts, plugs (11), preformed packing (10), plugs (15), preformed packing
(14), plugs (24), and preformed packing (23).
c. Install at ends of valve assembly (12) end plugs (24), preformed packing (23); install at top of valve assembly
plug (24), preformed packing (23), solenoid roll pin (2), preformed packing (3), and electrical solenoid assembly
(1) using hex head screws (22).
d. Install at base of valve assembly preformed packing (21), plug (20), spring (19), valve (10), seat (17), preformed
packing (16), rest pin (13) and sub plate (25).
NOTE
After valve is rebuilt care should be taken to keep contaminants
out of internal components. This can be done by placing plugs
in all hydraulic ports or by enclosing valve in polyethlene
(plastic) bag.
4-15
|
||
|
||
