| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-10
REPAIR
WARNING
The fumes from cleaning solvents are dangerous. Use solvents in open air or
well ventilated space. Wear proper eye protection and rubber gloves.
a. Wash all metal parts in cleaning solvent; inspect components and mating surfaces for scoring, gouges, severe
wear or other damage. Dry clean components with comp ressed air if possible. Severe wear is 0.05m of total
area of part being repaired or replaced.
b. Using suitable cleaning solvent, wash clean the friction disks (9). There should be no presence of oil on any
lining material or mating surfaces. Worn or scored disks must be replaced, prior to assembly friction disks must
be clean and dry.
ASSEMBLY
a. Align side plate (7) with rear housing plate (9). Install hub head flange (10), threaded adjusting pin (11) and set
screw (14).
b. On rear housing assembly install housing cylinder (5), rear friction disk (9), ratchet wheel (3), front friction disk
(12), install spacer sleeves (4 and 6), ratchet dog (1), ratchet dog spring (2), adjusting flange nut (20), and pin
(16).
c. Install retaining bushing (18); secure set screw (15); install front housing plate (23), socket head capscrews (8)
and hexhead self-locking nuts (13).
d. Install handle socket assembly (19), retaining socket screw (22), and hex head self-locking nut (21).
4-29
|
||
|
||
