EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS, SECTION Ill.

Custom Search

EXPLANATION OF COLUMNS IN THE MAC, SECTION II

TM-55-1905-223-24-11 Marine Sanitation System for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

SECTION II. MAINTENANCE ALLOCATION CHART FOR MARINE SANITATION SYSTEM

TM 56-1905-223-24-11

e Column 5 - Tools and Equipment . Column 5 specifies, by number code, those common tool sets

(not individual tools); special tools; Test, Measurement, and Diagnostic Equipment (TMDE); and support

equipment required to perform the designated function, which shall be keyed to the tools listed in Section Ill.

f Column 6 - Remarks. This column shall, when applicable, contain a letter code, in alphabetic order,

which shall be keyed to the remarks contained in Section IV.

B-4 EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS, SECTION Ill.

a Column 1 - Reference Code. The tool and test equipment reference code correlates with a number

code used in the MAC, Section II, Column 5.

b Column 2 - Maintenance Category . The lowest category of maintenance authorized to use the tool

or test equipment.

c Column 3 - Nomenclature. Name or identification of the tool or test equipment.

d Column 4 - National Stock Number . The National stock number (NSN) of the tool or test equipment.

e Column 5 - Tool Number . The manufacturer's part number.

B-5 EXPLANATION OF COLUMNS IN REMARKS, SECTION IV.

a Column 1 - Reference Code. The letter code recorded in Column 6, Section II.

b Column 2 - Remarks. This column lists information pertinent to the maintenance function being

performed as indicated in the MAC, Section II.

Change 2 B3