| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-12
c.
Check to see whether the equipment has been modified.
d. Remove and replace protective caps, plugs, inserts, wrappings, and tape
when inspection/inventory is completed. Inspect piping openings for
damage. Wipe off dirt, grease, or protective films at time of
installation.
e. Remove chocks from resilient mounted components.
3-5. Initial Setup Procedure. Includes operational checks and inspections that
are not performed for a routine startup. Direct support maintenance personnel
will perform initial setup in accordance with the operator's manual
TM 55-1905-223-10.
3-6. Normal Startup. Refer to operator's manual TM 55-1905-223-10.
3-7. Shutdown Procedure (Usual or Unusual). Refer to operator's manual
TM 55-1905-223-10.
Section III. INTERMEDIATE DIRECT SUPPORT PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
Section IV. INTERMEDIATE DIRECT SUPPORT TROUBLESHOOTING
3-9. Troubleshooting. Both a symptom index and a troubleshooting table are
provided. The symptom index will help you locate the information you need for
troubleshooting.
SYMPTOM INDEX
Troubleshooting
Procedure
AUXILIARY FIRE PUMP
Liquid not being pumped
Item 3
Pump noisy or vibrates
Item 4
CENTRIFUGAL PUMP UNIT
Not enough liquid being pumped
Item I
Pump takes too much power
Item 2
3-2
|
||
|
||
