| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-15
(12) Remove brass screw (16) and self-locking nut (17) and remove brake lining (15) from brake band (14).
d. Remove base mounting hardware (six nuts and bolts).
WARNING
Bow Anchor Windlass is extremely heavy; to prevent injury/death to personnel, two soldiers are
required to assist in handling.
e. Attack lifting sling and remove bow anchor windlass from foundation and set on deck.
f. Remove Bearing.
(1) Remove screw (14, FIGURE 4-5), nut (15), and lock washer (16) securing bearing unit housing (17).
(2) Remove housing (17) and lubrication fitting (19).
(3) Press bushing (18) from bearing housing (17).
g. Remove Clutch.
(1) Remove screw (7, FIGURE 4-5), nut (8) and lock washer (9) securing manual clutch handle (6).
(2) Remove handle (6).
(3) Remove shoulder bolt (11) and lock washer (12).
(4) Remove clutch lockout (13).
(5) Remove capscrew (12, FIGURE 4-4), retaining pillow block and spacer (11).
(6) Remove end spacer (11).
(7) Remove spool and spacer (10).
(8) Remove sliding jaw clutch handle (1).
(9) Remove machine key (9) from shaft (8).
h. Remove Gearbox.
CAUTION
The gear box is heavy. Ensure that lifting gear is adequate.
4-18
|
||
|
||
